Presentation is loading. Please wait.

Presentation is loading. Please wait.

R11(config)#router rip R11(config-router)#version 2 R11(config-router)#no auto-summary R11(config-router)#network 203.230.10.0 R11(config-router)#network.

Similar presentations


Presentation on theme: "R11(config)#router rip R11(config-router)#version 2 R11(config-router)#no auto-summary R11(config-router)#network 203.230.10.0 R11(config-router)#network."— Presentation transcript:

1

2

3

4

5

6

7

8 R11(config)#router rip R11(config-router)#version 2 R11(config-router)#no auto-summary R11(config-router)#network 203.230.10.0 R11(config-router)#network 203.230.11.0 R11(config-router)#network 203.230.12.0 R11(config-router)#network 203.230.13.0

9

10

11

12 R18(config)#interface loopback 0 R18(config-if)#ip address 66.66.66.66 255.255.255.0 R18(config-if)#router eigrp 1 R18(config-router)#network 203.230.23.0 R18(config-router)#network 203.230.25.0 R18(config-router)#network 203.230.26.0 R18(config-router)#network 203.230.27.0 R18(config-router)#network 66.0.0.0 R18(config-router)#no auto-summary

13

14

15

16

17 R14(config)#router ospf 7 R14(config-router)#router-id 4.4.4.4 R14(config-router)#network 203.230.29.0 0.0.0.255 a 0 R14(config-router)#network 203.230.30.0 0.0.0.255 a 0 R14(config-router)#network 203.230.31.0 0.0.0.255 a 0

18

19

20

21

22 R0(config)#router rip R0(config-router)#version 2 R0(config-router)#redistribute eigrp 1 metric 19 R0(config-router)#redistribute ospf 7 metric 19 R0(config)#router eigrp 1 R0(config-router)#redistribute rip metric 1544 10 255 1 1500 R0(config-router)#redistribute ospf 7 metric 1544 10 255 1 1500  차례대로 bandwidth, delay, reliability, load, MTU maximum size R0(config)#router ospf 7 R0(config-router)#redistribute rip subnets R0(config-router)#redistribute eigrp 1 subnets

23

24

25 Switch10(config)#vlan 10 Switch10(config-vlan)#name VLAN_10 Switch10(config-vlan)#exit Switch10(config)#vlan 20 Switch10(config-vlan)#name VLAN_20 Switch10(config-vlan)#exit Switch10(config)#vlan 30 Switch10(config-vlan)#name VLAN_30 Switch10(config-vlan)#exit

26 Switch10(config)#interface FastEthernet0/3 Switch10(config-if)#switchport access vlan 20 Switch10(config-if)#exit Switch10(config)#interface FastEthernet0/4 Switch10(config-if)#switchport access vlan 20 Switch10(config-if)#exit Switch10(config)#interface FastEthernet0/5 Switch10(config-if)#switchport access vlan 30 Switch10(config-if)#exit

27

28  하나의 회선으로 여러 개의 VLAN 을 사용하기 위해 설정 Switch10(config)#interface FastEthernet0/1 Switch10(config-if)#switchport mode trunk Switch10(config-if)#exit Switch10(config)#interface FastEthernet0/2 Switch10(config-if)#switchport mode trunk Switch10(config-if)#exit

29

30 Switch15(config)#interface FastEthernet0/3 Switch10(config-if)#switchport mode trunk R12(config)#interface FastEthernet0/0 R12(config-if)#no shutdown R12(config-if)#exit R12(config)#int fa0/0.10 R12(config-subif)#encapsulation dot1q 10 R12(config-subif)#ip add 1.1.1.1 255.255.255.0 R12(config-subif)#exit R12(config)#int fa0/0.20 R12(config-subif)#encapsulation dot1q 20 R12(config-subif)#ip add 2.2.2.1 255.255.255.0 R12(config-subif)#exit R12(config)#int fa0/0.30 R12(config-subif)#encapsulation dot1q 30 R12(config-subif)#ip add 3.3.3.1 255.255.255.0 R12(config-subif)#exit

31

32

33

34 Switch2(config)#vlan 10 Switch2(config-vlan)#name info Switch2(config-vlan)#vlan 30 Switch2(config-vlan)#name comm Switch2(config-vlan)#exit Switch2(config)#int fa0/1 Switch2(config-if)#switchport mode access Switch2(config-if)#switchport access vlan 10 Switch2(config-if)#exit Switch2(config)#int fa0/2 Switch2(config-if)#switchport mode access Switch2(config-if)#switchport access vlan 30 Switch2(config-if)#exit Switch2(config)#int range fa0/3-4 Switch2(config-if-range)#switchport mode trunk Switch2(config-if-range)#exit

35

36

37

38

39

40

41

42

43

44 R3(config)#int lo 0 R3(config-if)#ip add 1.1.1.1 255.255.255.0 R3(config-if)#exit R3(config)#interface FastEthernet0/0 R3(config-if)#ip address 203.230.37.2 255.255.255.0 R3(config-if)#no shutdown R3(config-if)#exit R3(config)#int s0/1/0 R3(config-if)#ip add 203.230.35.1 255.255.255.0 R3(config-if)#encapsulation frame-relay R3(config-if)#frame-relay map ip 203.230.34.1 302 broadcast R3(config-if)#frame-relay map ip 203.230.32.1 304 broadcast R3(config-if)#no shutdown R3(config)#router rip R3(config-router)#version 2 R3(config-router)#network 1.0.0.0 R3(config-router)#network 203.230.34.0 R3(config-router)#network 203.230.32.0 R3(config-router)#network 203.230.37.0 R3(config-router)#no auto-summary 304 403 204 402

45

46

47

48 R17(config)#int tunnel 1718 R17(config-if)#ip add 163.180.116.1 255.255.255.0 R17(config-if)#tunnel source s0/1/0 R17(config-if)#tunnel destination 203.230.26.1 R17(config-if)#exit R17(config)#int lo 1 R17(config-if)#ip add 111.111.111.1 255.255.255.0 R17(config-if)#exit R17(config)#router rip R17(config-router)#version 2 R17(config-router)#no auto-summary R17(config-router)#network 111.111.111.1 R17(config-router)#network 163.180.116.1 R17(config-router)#exit 163.180.116.1 163.180.116.2 163.180.117.1 163.180.117.2

49 R18(config)#int tunnel 1817 R18(config-if)#ip add 163.180.116.2 255.255.255.0 R18(config-if)#tunnel source s0/1/1 R18(config-if)#tunnel destination 203.230.26.2 R18(config-if)#exit R18(config)#int tunnel 1816 R18(config-if)#ip add 163.180.117.1 255.255.255.0 R18(config-if)#tunnel source s0/3/0 R18(config-if)#tunnel destination 203.230.27.2 R18(config-if)#exit R18(config)#int lo 1 R18(config-if)#ip add 122.122.122.1 255.255.255.0 R18(config-if)#exit R18(config)#router rip R18(config-router)#version 2 R18(config-router)#no auto-summary R18(config-router)#network 122.122.122.1 R18(config-router)#network 163.180.117.1 R18(config-router)#network 163.180.116.2 R18(config-router)#exit 163.180.116.1 163.180.116.2 163.180.117.1 163.180.117.2

50 R16(config)#int tunnel 1618 R16(config-if)#ip add 163.180.117.2 255.255.255.0 R16(config-if)#tunnel source s0/1/0 R16(config-if)#tunnel destination 203.230.27.1 R16(config-if)#exit R16(config)#int lo 1 R16(config-if)#ip add 133.133.133.1 255.255.255.0 R16(config-if)#exit R16(config)#router rip R16(config-router)#version 2 R16(config-router)#no auto-summary R16(config-router)#network 133.133.133.1 R16(config-router)#network 163.180.117.2 R16(config-router)#exit 163.180.116.1 163.180.116.2 163.180.117.1 163.180.117.2

51

52

53 R13(config)# ip dhcp excluded-address 203.230.16.1 R13(config)# ip dhcp excluded-address 203.230.16.255 R13(config)#ip dhcp inokyuni R13(dhcp-config)#network 203.230.16.0 255.255.255.0 R13(dhcp-config)#dns-server 1.1.1.1 R13(dhcp-config)#default-router 203.230.16.1 R13(dhcp-config)#exit

54

55


Download ppt "R11(config)#router rip R11(config-router)#version 2 R11(config-router)#no auto-summary R11(config-router)#network 203.230.10.0 R11(config-router)#network."

Similar presentations


Ads by Google