You must fill unused area with 0xFF

Presentation on theme: "You must fill unused area with 0xFF"— Presentation transcript:

1 You must fill unused area with 0xFF
FPO ORDER SHEET v1.3 Factory Programming Order & VERIFICATION SHEET MC81F MRF Please fill in the bold areas. 1. Customer Information 2. Device Information Company Name Package 80 MQFP (Q) Wafer Chip sales code:( ) Application Order Date YYYY MM DD ROM Size 16 K byte Tel : Fax : Name & : Signature 4. Writing Option Chip sales code C : P검 진행한 wafer 상태로 출하하는 방식 C(C) : P검 진행한 wafer 를 sawing 하여 pass die 만 chip carrier 에 담아서 출하하는 방식 C(F) : P검 진행한 wafer 를 sawing 하여 모든 pass/fail die 를 그대로 wafer ring based UV tape carrier 에 옮겨서 출하하는 방식 C(G) : P검 진행한 wafer 를 sawing 하여 pass die 만 wafer ring based UV tape carrier 에 옮겨서 출하하는 방식 C(T) : P검 진행한 wafer 를 sawing 하여 pass die 만 Tape&Reel 로 출하하는 방식 3. OTP file Information Internal 4MHz OSC. And R45/R46 enable Crystal or Resonator OSC. Internal 8MHz OSC. And R45/R46 enable OFP enabled POR and R47 port enabled** ONP disabled System Clock 2X enabled Check Sum File Name .OTP You must fill unused area with 0xFF C000H 16K FFFFH 5. ROM CODE Verification 6. Remark Verification Date : Marking : standard Check Sum : Option: Name:

2 You must fill unused area with 0xFF
FPO ORDER SHEET v1.3 Factory Programming Order & VERIFICATION SHEET MC81F MRF Please fill in the bold areas. 1. Customer Information 2. Device Information Company Name Package 64 MQFP(Q) LQFP(L) Wafer Chip sales code:( ) Application Order Date YYYY MM DD ROM Size 16 K byte Tel : Fax : Name & : Signature 4. Writing Option Chip sales code C : P검 진행한 wafer 상태로 출하하는 방식 C(C) : P검 진행한 wafer 를 sawing 하여 pass die 만 chip carrier 에 담아서 출하하는 방식 C(F) : P검 진행한 wafer 를 sawing 하여 모든 pass/fail die 를 그대로 wafer ring based UV tape carrier 에 옮겨서 출하하는 방식 C(G) : P검 진행한 wafer 를 sawing 하여 pass die 만 wafer ring based UV tape carrier 에 옮겨서 출하하는 방식 C(T) : P검 진행한 wafer 를 sawing 하여 pass die 만 Tape&Reel 로 출하하는 방식 3. OTP file Information Internal 4MHz OSC. And R45/R46 enable Crystal or Resonator OSC. Internal 8MHz OSC. And R45/R46 enable OFP enabled POR and R47 port enabled** ONP disabled System Clock 2X enabled Check Sum File Name .OTP You must fill unused area with 0xFF C000H 16K FFFFH 5. ROM CODE Verification 6. Remark Verification Date : Marking : standard Check Sum : Option: Name: