Presentation is loading. Please wait.

Presentation is loading. Please wait.

Common Emitter Amp. 참고 문헌 : 전자회로 5판, Sedra/Smith - 5장의 내용을 중심으로 구성.

Similar presentations


Presentation on theme: "Common Emitter Amp. 참고 문헌 : 전자회로 5판, Sedra/Smith - 5장의 내용을 중심으로 구성."— Presentation transcript:

1 Common Emitter Amp. 참고 문헌 : 전자회로 5판, Sedra/Smith - 5장의 내용을 중심으로 구성

2 NPN common emitter degeneration
In electronics, a common-emitter amplifier is one of three basic single-stage bipolar-junction-transistor (BJT) amplifier topologies, typically used as a voltage amplifier. In this circuit the base terminal of the transistor serves as the input, the collector is the output, and the emitter is common to both (for example, it may be tied to ground reference or a power supply rail), hence its name. NPN Common Emitter Figure 1: Basic NPN common-emitter circuit (neglecting biasing details). NPN common emitter degeneration Figure 2: Adding an emitter resistor decreases gain, but increases linearity and stability

3 Common-Emitter(CE, 공통 이미터) 구성은 매우 폭 넓게 사용된다.
Figure Basic structure of the circuit used to realize single-stage, discrete-circuit BJT amplifier configurations. 그림 5.59 단일단 개별 회로 BJT 증폭기 구성들을 실현하기 위해 활용된 회로의 기본적인 구조

4 그림 5.60(a)는 그림 5.59의 회로를 사용하여 구현된 CE 증폭기를 나타낸다.
이미터에 교류 접지(ac ground)라고도 부르는 신호 접지를 설정하기 위해, 캐패시터 CE를 이미터와 접지 사이에 접속하였다. -> 이미터 신호 전류는 CE 를 통하여 접지로 빠져 나가므로 전류 전원 I의 출력 저항을 우회한다. 따라서 CE 를 우회 캐패시터(bypass capacitor)라고 부른다. 일반적으로 고주파일수록 bypass capacitor가 효과적이다. 일반적으로 CE 의 도움으로 이미터에 0의 신호 전압(0V)를 설정한다고 가정한다. CE 증폭기의 단자 특성들, 즉 입력 저항, 전압 이득, 그리고 출력 저항을 결정하기 위하여, BJT를 그것의 하이브리드 ㅠ 소신호 모델로 대치 CE 증폭기의 결과적인 소신호 등가 회로 Figure (a) A common-emitter amplifier using the structure of Fig (b) Equivalent circuit obtained by replacing the transistor with its hybrid-p model. 그림 5.60 (a) 그림 5.59의 구조를 사용한 공통 이미터 증폭기 (b) 트랜지스터를 그 하이브리드 ㅠ 모델로 대치하여 얻어진 등가 회로

5 이미터와 접지 사이에 저항 하나를 포함시키면 증폭기 특성이 변화된다. 입력저항 Rib는 인수 1+gmRe 만큼 증가한다.
이미터 저항을 가진 공통 이미터 증폭기 이미터와 접지 사이에 저항 하나를 포함시키면 증폭기 특성이 변화된다. 입력저항 Rib는 인수 1+gmRe 만큼 증가한다. 베이스에서 컬렉터로의 전압 이득 Av는 인수 1+gmRe 만큼 감소한다. 회로가 안정적인 동작을 수행한다. Figure (a) A common-emitter amplifier with an emitter resistance Re. (b) Equivalent circuit obtained by replacing the transistor with its T model. 그림 5.61 (a) 이미터 저항 Re를 가진 공통 이미터 증폭기 (b) 트랜지스터를 그 T 모델로 대치하여 얻어진 등가 회로.

6 Common Emitter with Emitter Resistance
Table 5.6 Characteristics of Single Stage Discrete BJT Amp.


Download ppt "Common Emitter Amp. 참고 문헌 : 전자회로 5판, Sedra/Smith - 5장의 내용을 중심으로 구성."

Similar presentations


Ads by Google